eSun 3D Printer Standard Resin 1Kg-White Specifically designed for LCD/LED light source to achieve better printing quality and better than stock resins of Anycubic and Wanhao D7. It is General Purpose Resin, Compatible to most LCD printers and DLP with LED UV having Faster Printing Speed and Low Odor and No Toxic.

Precautions:

1. Storage
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

2. Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.

Features:

1. Low viscosity
2. Low Odor
3. No Toxic.
4. Improved flow
5. Easy to clean
6. Stronger than most other standard resins
7. Scratch-resistant
8. High precision
9. Low warp
10. Moisture-resistant

Package Includes:

1 x eSun 3D Printer Standard Resin for LCD 3D Printers 1Kg-White

Specifications :-

Wavelength(nm)	395-405
Density(g/m^3)	1.08-1.13
Color	White
Viscosity(25C MPa s)	150-250
Hardness(Shore D)	80-82
Tensile Strength(MPa)	46-67
Elongation at Break(%)	28-35
Flexural Strength(MPa)	46-72
Flexural Modulus(MPa)	1000-1400
IZOD Impact Strength(J/m)	18-40