This is an all-new pan and tilt mechanism for the 5MP OV5647 camera, which is compatible with the raspberry pi. This mechanism can move your camera in two dimensions with 180 degrees horizontal and 145 degrees vertical movements. The PTZ camera controller board outputs the PWM signals to drive the servo motors directly. Therefore, this can be used to monitor places that should be covered by multiple ones commonly in the surveillance system.

Applications:

1. IoT cameras
2. Robot cameras
3. Wildlife cameras
4. Other security and surveillance projects

Features:

1.Camera

1. Sensor: OV5647
2. Resolution: 5MP 2592H x 1944V
3. Frame Rate:[email protected],[email protected]
4. IR Sensitivity: Integral IR filter, visible light only
5. Field of View: 54(H) x 41(V)
6. Camera Board Dimension: 25mm x 24mm

2.Digital Servo

1. Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
2. Operating Speed: 0.13sec/60 at 3.6V, 0.09sec/60 at 4.8V
3. Operating Voltage: 3.6v4.8v
4. Operating Current: 350mA
5. Dead Band: 3 use
6. Dimension: 20mm x 8.75mm x 22mm

3.Control Board

1. PWM Driver: PCA9685
2. PWM resolution: 12-bit
3. Ambient light sensor: TSL2581FN
4. Ambient light resolution: 16-bit
5. Communication interface: I2C
6. Operating voltage: 3.3V/5V
7. Dimension: 25mm x 61mm

Package Includes:

1 x 5MP camera for Raspberry Pi with a 15cm 15 pin camera cable for Raspberry Pi

2 x Digital servos

1 set epoxy bracket pieces with screws

1 x PWM control board

4 x Female to female jumper wires (The wire has no fixed colour)

2 x Male to female jumper wires (The wire has no fixed colour)