LC 5A 12V Overcurrent Protection AC Current Detection Sensor Module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM; NC, NO three ports to control the external circuit on and off, in order to achieve over-current protection.
Functions:
- Current detection resolution can change the parameter of resistance parameters;
- Output over-current switching signal output;
- The over-current signal setting critical point adjustable.
Using Instructions:
By setting the potentiometer to set the overcurrent protection point, the clockwise adjustment reduces the detection current.
As bellows:
- Measured the wire through the current transformer, connect VCC and GND to the DC12V power supply;
- Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on; is connected to the relay means activated), then reduce or cut off the current flowing that through the tested wire; if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected; is connected to the relay means it release);
- When reduce or cut off the current flowing through the wire; the relay is not released, will still need to continue to adjust the potentiometer to find the over-current protection point.
Package Includes:
1 x 5A 12V Overcurrent Protection AC Current Detection Sensor Module.
Specifications :-
| Operating voltage | DC12V |
| Operating current | <20MA |
| Operating frequency range | 20Hz ~ 400Hz |
| Output mode | Switch signal output |
| Maximum detection wire diameter | 5.2mm |
| Mounting hole: hole diameter is 3mm, hole distance | 52.5mm |
| Operating environment | -40 ??~ +85 ??/span> |
| The current detection range | AC0.3A-5A |
| Dimensions (LxWxH)mm | 38 * 44 x 12 |
| Weight | 22g |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 430.7 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
5A 12V Overcurrent Protection AC Current Detection Sensor Module
- Product Code: EC-5313
- Availability: 14
-
Rs.252.00
- (Excluding 18% GST)