This Bio-based 3D printing resin uses PLA monomers as raw material and has unique features that make it a perfect general-purpose resin. Specifically designed for LCD/LED light source to achieve better printing quality. PLA Resin, Compatible to most LCD printers using 405 nm wavelength light. 75 shore D hardness and having Faster Printing Speed

Precautions:

Storage:
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.

Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) for about 30 seconds.

Features:

1. Low odor
2. Safe & Environmentally friendly
3. Biodegradable
4. Low viscosity
5. Improved flow
6. Easy to clean
7. Stronger than most other standard resins
8. Scratch-resistant
9. High precision
10. Low warp
11. Moisture-resistant

Package Includes:

1 x eSUN 3D Printer bio Resin for LCD 3D Printers,1kg eResin-PLA

Specifications :-

Material	PLA
Wavelength(nm)	395-405
Color	Gray
Density(g/m^3)	1.07-1.13
Viscosity(25C MPa s)	200-300
Hardness(Shore D)	75-80
Tensile Strength(MPa)	35-50
Elongation at Break(%)	20-50
Flexural Strength(MPa)	40-60
Flexural Modulus(MPa)	600-800
IZOD Impact Strength(J/m)	15-32