A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).
The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
How to Adjust the Force Range:
* In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1k min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.
Typical Performance:
Linearity (Error):< 3% of Full Scale (Line drawn from 0 to 50% load)
Repeatability:< 2.5% (Conditioned Sensor, 80% of Full Force Applied)
Hysteresis:< 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
Drift:<5% / logarithmic time (Constant Load of 111 N (25 lb))
Response Time:< 5 sec (Time required for the sensor to respond to an input force; Impact load recorded on Oscilloscope)
Operating Temperature:-40C 60C (-40F 140F)*
* Force reading change per degree of temperature change = 0.36%/C (0.2%/F)
Package Includes:
1 x FlexiForce A502 Ultra Thin Force Sensor
Specifications :-
| Force Range | 0-222N (0 22.6 Kg) |
| Length ( cm ) | 81.3 mm |
| Width (mm) | 55.9 |
| Thickness (mm) | 0.203 |
| Sensing Area (mm) | 50.8 |
| Surface Layer | Polyester |
| Connector | 2-pin Male Square Pin |
| Drift | < 5% per logarithmic time scale |
| Hysteresis | < 4.5 % of full scale |
| Linearity (Error) | < 3% of full scale |
| Max Current (A) | 0.2 |
| Operating Temperature Range (C) | -40 to 60 |
| Operating Voltage (VDC) | 0.25 ~ 1.25 |
| Pin Spacing (mm) | 2.54 |
| Repeatability | < 2.5% |
| Response Time ( S) | 5 |
| RoHS Compliant | Yes |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 1615.42 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
FlexiForce A502 Ultra Thin Force Sensor
- Product Code: EC-5344
- Availability: 7
-
Rs.2507.00
- (Excluding 18% GST)