Flat 10% Off on Prepaid Orders, Apply Coupon  GET10  to get Instant 10% Discount

MG-811 Carbon Dioxide Sensor Module (Carbon dioxide sensor) is a carbon dioxide sensor (CO2) sensor that is a Metal Oxide Sensor sensor, which must heat the tank to the specified level.(With the method of supplying power) will cause heat vapor and separate CO2 from the air. This sensor module has an MG-811 onboard as the sensor component.A signal output circuit for heating the sensorThe MG-811 is highly sensitive to CO2 and less sensitive to alcohol and CO.The output voltage of the CO2 increases.

Useful for greenhouses and medical projects. Sends an analog signal that decreases as the concentration of CO2 increases. This module also includes a digital output pin with TTL output. The Potentiometer on board is used to set the Digital Output Setpoint. After setting the potentiometer threshold, once that threshold is reached, an LED on the sensor will illuminate and the digital pin will give a HIGH voltage signal.


Pinout:

  1. VCC: 6V ( You can use a4 AA battery holderfor this ).
  2. AOUT: Analog Output (voltage decreases as CO2 Levels increase).
  3. DOUT: Digital Output that goes HIGH when the threshold is reached (set the threshold by turning the onboard potentiometer).
  4. GND: 0V.


Features:

  1. Wide detecting scope.
  2. High sensitivity & stability.
  3. Simple drive circuit.
  4. Digital output: Active low (When it outputs a low-level signal, the indicator LED will be on)
  5. Analog output: Two Range Options: 0 to 2V or 0V to 4V. The default is 0V to 2V DC
  6. Compatible with Arduino & Raspberry Pi (for use on analog output with Raspberry Pi you will need anAnalog to Digital Converter Chip).


Package Includes:

1 x MG811 Air Carbon Dioxide (CO2) Sensor Module


Additional information

Model

MG811

Operating Voltage (V)    

6V DC

Characteristic Gas

CO2

Detection Zone

0 10000 ppm

Length (mm)

32

Width (mm)

22

Height (mm)

29

Weight (gm)

10


Brand/Manufacturer Generic
Country Of Origin China
Packer / Importer Address Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.
MRP Rs. 3534.1 (Inclusive of all Taxes)
Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.

MG811 Air Carbon Dioxide (CO2) Sensor Module

  • Product Code: EC-5093
  • Availability: 50
  • Rs.2799.00
  • (Excluding 18% GST)

OR

For all Bulk & B2B Product Enquiries Kindly share your requirement at care@electronicscomp.com