ESP32-S3-Touch-LCD-1.69 is a cost-effective, high-performance microcontroller development board designed by Waveshare. On the small plates, onboard a 1.69inch capacitive touch LCD screen, Lithium battery charging chip, 6-axis sensor (3-axis accelerator and 3-axis gyroscope), and peripheral interface such as RTC, easy to develop and embed into products.

Note: For More Informationhttps://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.69

Hardware Description:
Onboard patch antenna, uses 0 ohm shorted optional external antennas, as shown in .
Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (support charging), supports timing function, as shown in and .
Onboard QMI8658C 6-axis Inertial Measurement Unit (IMU), including a 3-axis gyroscope and a 3-axis accelerator, as shown in .
Onboard ETA6089 high-performance Lithium battery charging chip, M1.25 Lithium battery interface, easy to install lithium batteries charge and discharge for long-term usage, as shown in and .
Onboard buzzer can be utilized as an audio peripheral, as shown in .
Onboard Type-C interface, connect to ESP32-S3 USB for demo programming and log printing, as shown in .
Onboard BOOT and RST function buttons, easy to reset and enter the download mode, as shown in and .
Onboard function circuit button, can be customized as power-on button, and can identify single pressing, double pressing, and long pressing, as shown in .

Features:

1. Equipped with high-performance Xtensa32-bit LX7 dual-core processor, main frequency running up to 240MHz.
2. Support 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), and onboard antenna.
3. Built-in 512KB SRAM and 384KB ROM, 8MB PSRAM, and external 16MB Flash.
4. Onboard 1.69inch capacitive touch LCD screen, 240280 resolution, 262K colors, can clearly display color pictures.

Package Includes:

1 x Waveshare ESP32-S3 1.69inch Touch Display Development Board